OMAX
2626
PRECISION JETMACHINING CENTER
The small size and an efficient work envelope, the OMAX 2626 is a perfect fit for even the most space-challenged shops.
- Cutting envelope of 2' 2" x 2' 2" (0.66 m x 0.66 m)
- ±0.001" (±0.025 mm) linear position accuracy
Expand all
- Backed by OMAX's exclusive IntelliMAX Premium Software
- Pre-loaded linear bearings and precision ball screws
- Standard programmable Motorized Z-Axis with a precision OMAX MAXJET 5i Nozzle boosts productivity and process efficiency
- Standard Rapid Water Level Control for cleaner, safer, and quieter submerged cutting completes most work below 80 dBA
- Standard whip plumbing
- Designed and manufactured at the OMAX factory in Kent, Washington, USA
- Does not create heat-affected zones or mechanical stresses
- Machines a wide range of materials and thicknesses, from metals and composites to glass and plastics
- No tool changes & minimal fixturing dramatically reduce setup
DIMENSIONS & SPECS
| Footprint (with pump) | 9' 9" x 6' 10" (2.97 m x 2.08 m) |
|---|---|
| Height (with whip plumbing) | 8' (2.44 m) |
| Operating Weight | 7,393 lb (3,353 kg) |
| Weight (tank empty) | 3,800 lb (1,742 kg) |
| X-Y Cutting Travel* | 2' 2" x 2' 2" (0.66m x 0.66 m) |
| Z-Axis Travel (with Motorized Z Axis)* | 8" (203 mm) |
| Table Size | 3' 10" x 2' 7" (1.17 m x 0.79 m) |
| Material Supports Slats | 4" x 1/8" Galvanized Steel |
|---|---|
| Maximum Supported Material Load | 400 lbs/sq ft (1,950 kg/sq meter) |
| Electrical Requirements | Varies depending on configuration. (See pump specs.) |
| Noise Level | Below 80 dBA at one meter for submerged cutting |
| Speed | 180 in/min (4,572 mm/min) |
| Linear Positional Accuracy* | ±0.001" (±0.025 mm) |
| Repeatability* | ±0.001" (±0.025 mm) |
| Ballbar Circularity* | ±0.003" (±0.076 mm) |
* Accessories may reduce travel. Accuracy specifications are at 72° F (22° C).
PUMP INFO
Maximized uptime with 1,000 hours between maintenance cycles
Increased production by delivering 30% more cutting power
Variable Frequency Drive reduces startup power consumption and maximizes operating flexibility
| EnduroMAX 100 HP | EnduroMAX 50 HP | EnduroMAX 30 HP | DynaMAX 330 | |
|---|---|---|---|---|
| Motor Power | 100 HP (75 kW) | 50 HP (37kW) | 30 HP (22 kW) | 30 HP (22 kW) |
| MAX Jet Power | 85 HP (63 kW) | 42.5 HP (31.5 kW) | 25.5 HP (18.7 kW) | 20.6 HP (15.1 kW) |
| Output Pressure | 60,000 psi | 60,000 psi | 60,000 psi | 60,000 psi |
| Orifice & Flow Rate ** | 0.022" / 2.25 gpm (0.56 mm / 8.52 lpm) |
0.016" / 1.20 gpm (0.41 mm / 4.54 lpm) |
0.012" / 0.67 gpm (0.30 mm / 2.54 lpm) |
0.014" / 1.0 gpm (0.35 mm / 3.8 lpm) |
| Footprint LxWxH | 44" x 62" x 44" (1,118 mm x 1,575 mm x 1,118 mm) |
66" x 36" x 38.5" (1,676mm x 914mm x 978mm) |
66" x 36" x 38.5" (1,676mm x 914mm x 978mm |
43" x 53" x 40" (1090 mm x 1350 mm x 1010 mm) |
