OptiMAX
60X
PRECISION JETMACHINING CENTER
The OMAX OptiMAX 60X is the culmination of three decades of engineering expertise and experience, resulting in the world’s most advanced waterjet.
- Cutting envelope of 10' x 5’ 2” (3.04 m x 1.57 m)
- ±0.001" (±0.025 mm) linear position accuracy
Expand all
- Backed by our exclusive IntelliMAX Premium Software
- Exclusive IntelliTRAX abrasive jet linear drive system provides 350 in/min (8.9 m/min) traverse with real-time closed-loop positioning feedback
- 12-inch (305 mm) programmable Z axis travel with lowest ceiling height requirement design in the industry.
- Standard Rapid Water Level Control for cleaner, safer, and quieter submerged cutting completes most work below 80 dBA
- Designed and manufactured at the OMAX factory in Kent, Washington, USA
- Does not create heat-affected zones or mechanical stresses
- Machines a wide range of materials and thicknesses, from metals and composites to glass and plastics
- No tool changes & minimal fixturing dramatically reduce setup
DIMENSIONS & SPECS
| Footprint (with pump & controller) | 22' 8" x 11' 11" (6.91 m x 3.63 m) |
|---|---|
| Height (with Scissor plumbing) | 9' 9" (2.97 m) |
| Operating Weight | 36,118 lb (16,383 kg) |
| Weight (tank empty) | 8,500 lb (3,855 kg) |
| X-Y Cutting Travel* | 10' x 5' 2" (3.04 m x 1.57 m) |
| Z-Axis Travel (with Motorized Z Axis)* | 12" (304 mm) |
| Table Size | 12' 6" x 6' 2" (3.81 m x 1.88 m) |
| Material Supports Slats | 4" x 1/8" Galvanized Steel |
|---|---|
| Maximum Supported Material Load | 400 lbs/sq ft (1,950 kg/sq meter) |
| Electrical Requirements | 3-Phase, 380-480 VAC ±10%, 50-60 Hz |
| Noise Level | Below 80 dBA at one meter for submerged cutting |
| Speed | 350 in/min (8.89 m/min) |
| Linear Positional Accuracy* | ±0.001" (±0.025 mm) |
| Repeatability* | ±0.001" (±0.025 mm) |
| Ballbar Circularity* | ±0.003" (±0.076 mm) |
* Accessories may reduce travel. Accuracy specifications are at 72° F (22° C).
PUMP INFO
Maximized uptime with 1,000 hours between maintenance cycles
Increased production by delivering 30% more cutting power
Variable Frequency Drive reduces startup power consumption and maximizes operating flexibility
| EnduroMAX 50 HP | EnduroMAX 40 HP | EnduroMAX 30 HP | |
|---|---|---|---|
| Motor Power | 50 HP (37kW) | 40 HP (30kW) | 30 HP (22 kW) |
| MAX Jet Power | 42.5 HP (31.5 kW) | 34.0 HP (34 kW) | 25.5 HP (18.7 kW) |
| Output Pressure | 60,000 psi | 60,000 psi | 60,000 psi |
| Orifice & Flow Rate | 0.016" / 1.20gpm (0.41 mm / 4.54 lpm) |
0.014" / 0.92gpm (0.36 mm / 3.48 lpm) |
0.012" / 0.67 gpm (0.30 mm / 2.54 lpm) |
| Footprint LxWxH | 66" x 36" x 38.5" (1,676mm x 914mm x 978mm) |
66" x 36" x 38.5" (1,676mm x 914mm x 978mm) |
66" x 36" x 38.5" (1,676mm x 914mm x 978mm |
