OMAX MicroMAX Abrasive Waterjet

OMAX MicroMAX OMAX MicroMAX

MicroMAX
PRECISION JETMACHINING CENTER

The MicroMAX is your solution for ultra-precision abrasive waterjet machining.

  • Cutting envelope of 2' 1" x 2' 1" (0.63 m x 0.63 m)
  • ±0.0001" (±2.5 micron) linear position accuracy

Waterjet system includes pump and software.

Expand all

  • Stiff construction greatly reduces vibration and increases accuracy
  • Vibration isolation of table and gantries
  • All components have matched thermal expansion
  • Full enclosure with environmental controls provides quiet, safe and clean operation below 80db
  • Advanced pressure controls for piercing delicate materials
  • Standard OMAX 7/15 Mini MAXJET 5 Nozzle acquires finer precision cutting capability with a 0.007" orifice and a 0.015" mixing tube combination
  • Standard Tilt-A-Jet taper eliminating abrasivejet cutting head
  • Standard Rapid Water Level Control for cleaner, safer, and quieter submerged cutting completes most work below 80 dBA

  • Designed and manufactured at the OMAX factory in Kent, Washington, USA
  • Does not create heat-affected zones or mechanical stresses
  • Machines a wide range of materials and thicknesses, from metals and composites to glass and plastics
  • No tool changes & minimal fixturing dramatically reduce setup

DIMENSIONS & SPECS

Footprint (with pump & controller)10' 2" x 7' 2" (3.10 m x 2.18 m)
Height (with whip plumbing)7' 6" (2.29 m)
Operating Weight7,372 lb (3,344 kg)
Weight (tank empty)3,700 lb (1,678 kg)
X-Y Cutting Travel*2' 1" x 2' 1" (0.63 m x 0.63 m)
Z-Axis Travel (with Motorized Z Axis)*4.5" (114 mm)
Table Size2' 11" x 3' 0" (0.89 m x 0.91 m)
Material Supports Slats4" x 1/8" Galvanized Steel
Maximum Supported Material Load400 lbs/sq ft (1,950 kg/sq meter)
Electrical Requirements3-Phase, 380-480 VAC ±10%, 50-60 Hz
Speed100 in/min (2,540 mm/min)
Linear Positional Accuracy*±0.0001" (±2.5 micron)
Repeatability*±0.0001" (±2.5 micron)
Ballbar Circularity*±0.0005" (±13 microns)

* Accessories may reduce travel. Accuracy specifications are at 72° F (22° C).

PUMP INFO

Maximized uptime with 1,000 hours between maintenance cycles
Increased production by delivering 30% more cutting power
Variable Frequency Drive reduces startup power consumption and maximizes operating flexibility

Learn more about OMAX pumps

  EnduroMAX 30HP
Motor Power 30 HP (22 kW)
MAX Jet Power 25.5 HP (18.7 kW)
Output Pressure 60,000 psi
Orifice & Flow Rate ** 0.012" / 0.67 gpm
(0.30 mm / 2.54 lpm)
Footprint LxWxH 44" x 62" x 44"
(1,118 mm x 1,575 mm x 1,118 mm)

Want to know more about the MicroMAX Precision Jetmachining Center? Contact Sales