MAXIEM
3060
JETMACHINING CENTER
The MAXIME 3060 is perfect for sizable part runs or large single cuts.
- Cutting envelope of 20' 6" x 10' 2" (6.24 m x 3.09 m)
- ±0.003" (±0.076 mm) linear position accuracy
Expand all
- Backed by our exclusive IntelliMAX Standard Software
- Powerful all-in-one controller computer with large 23" screen
- Standard IntelliTRAX traction drive inside the X-Y Axis beams fully enclosed inside coated steel covers
- Standard programmable Motorized Z-Axis with a precision OMAX MAXJET 5i Nozzle boosts productivity and process efficiency
- Standard scissor-style hard plumbing
- Designed and manufactured at the OMAX factory in Kent, Washington, USA
- Does not create heat-affected zones or mechanical stresses
- Machines a wide range of materials and thicknesses, from metals and composites to glass and plastics
- No tool changes & minimal fixturing dramatically reduce setup
DIMENSIONS & SPECS
| Footprint (with pump & controller) | 28' 6" x 16' 6" (8.69 m x 5.03 m) |
|---|---|
| Height (with scissor plumbing) | 8' 10" (2.69 m) |
| Operating Weight | 70,105 lb (31,799 kg) |
| Weight (tank empty) | 26,000 lb (11,793 kg) |
| X-Y Cutting Travel* | 20' 6" x 10' 2" (6.24 m x 3.09 m) |
| Z-Axis Travel (with Motorized Z Axis)* | 12" (304 mm) |
| Table Size | 22' 9" x 10' 8" (6.93 m x 3.25 m) |
| Material Supports Slats | 4" x 14Ga Galvanized Steel(102 mm x 2 mm) |
|---|---|
| Maximum Supported Material Load | 300 lbs/sq ft (1,465 kg/sq meter) |
| Electrical Requirements | 3-Phase, 380-480 VAC ±10%, 50-60 Hz |
| Noise Level | Below 80 dBA at one meter for submerged cutting |
| Speed | 500 in/min (12,700 mm/min) |
| Linear Positional Accuracy* | ±0.003" (±0.076 mm) |
| Repeatability* | ±0.001" (±0.025 mm) |
* Accessories may reduce travel. Accuracy specifications are at 72° F (22° C).
PUMP INFO
Continuous 50,000psi operation for faster part processing
Reliable design capable of over 500 cutting hours between maintenance cycles
Advanced pump technology lowers operating costs and increases pump operating life
| MAXIEM 40 HP | MAXIEM 30 HP | MAXIEM 20 HP | DynaMAX 330 | |
|---|---|---|---|---|
| Motor Power | 40 HP (30 kW) | 30 HP (22 kW) | 20 HP (15 kW) | 30 HP (22 kW) |
| MAX Jet Power | 34 HP (25 kW) | 25.5 HP (19 kW) | 17 HP (12.5 kW) | 20.6 HP (15.1 kW) |
| Output Pressure | 50,000 psi | 50,000 psi | 50,000 psi | 60,000 psi |
| Orifice & Flow Rate ** | 0.015" / 1.09 gpm (0.41 mm / 4.13 lpm) | 0.014" / 0.84 gpm (0.36 mm / 3.18 lpm) | 0.011" / 0.52 gpm (0.28 mm / 1.97 lpm) | 0.011” / 0.6 gpm (0.28mm / 2.3 lpm) |
| Footprint LxWxH | 52.5" x 31" x 42" (1,334 mm x 787 mm x 1,067 mm) | 52.5" x 31" x 42" (1,334 mm x 787 mm x 1,067 mm) | 52.5" x 31" x 42" (1,334 mm x 787 mm x 1,067 mm) | 43" x 53" x 40" (1090 mm x 1350 mm x 1010 mm) |
