MAXIEM
3060
JETMACHINING CENTER
The MAXIME 3060 is perfect for sizable part runs or large single cuts.
- Cutting envelope of 20' 6" x 10' 2" (6.24 m x 3.09 m)
- ±0.003" (±0.076 mm) linear position accuracy
- Backed by our exclusive IntelliMAX Standard Software
- Powerful all-in-one controller computer with large 23" screen
- Standard IntelliTRAX traction drive inside the X-Y Axis beams fully enclosed inside coated steel covers
- Standard programmable Motorized Z-Axis with a precision OMAX MAXJET 5i Nozzle boosts productivity and process efficiency
- Standard scissor-style hard plumbing
- Designed and manufactured at the OMAX factory in Kent, Washington, USA
- Does not create heat-affected zones or mechanical stresses
- Machines a wide range of materials and thicknesses, from metals and composites to glass and plastics
- No tool changes & minimal fixturing dramatically reduce setup
- 1 year of free training
- 1 year of free software upgrades
- 1-year / 2000-hour limited warranty
- 1 day of onsite training upon installation
DIMENSIONS & SPECS
| Footprint (with pump & controller) | 28' 6" x 16' 6" (8.69 m x 5.03 m) |
|---|---|
| Height (with scissor plumbing) | 8' 10" (2.69 m) |
| Operating Weight | 70,105 lb (31,799 kg) |
| Weight (tank empty) | 26,000 lb (11,793 kg) |
| X-Y Cutting Travel* | 20' 6" x 10' 2" (6.24 m x 3.09 m) |
| Z-Axis Travel (with Motorized Z Axis)* | 12" (304 mm) |
| Table Size | 22' 9" x 10' 8" (6.93 m x 3.25 m) |
| Material Supports Slats | 4" x 14Ga Galvanized Steel(102 mm x 2 mm) |
|---|---|
| Maximum Supported Material Load | 300 lbs/sq ft (1,465 kg/sq meter) |
| Electrical Requirements | 3-Phase, 380-480 VAC ±10%, 50-60 Hz |
| Noise Level | Below 80 dBA at one meter for submerged cutting |
| Speed | 500 in/min (12,700 mm/min) |
| Linear Positional Accuracy* | ±0.003" (±0.076 mm) |
| Repeatability* | ±0.001" (±0.025 mm) |
* Accessories may reduce travel. Accuracy specifications are at 72° F (22° C).
PUMP INFO
Continuous 50,000psi operation for faster part processing
Reliable design capable of over 500 cutting hours between maintenance cycles
Advanced pump technology lowers operating costs and increases pump operating life
| MAXIEM 40 HP | MAXIEM 30 HP | MAXIEM 20 HP | DynaMAX 330 | |
|---|---|---|---|---|
| Motor Power | 40 HP (30 kW) | 30 HP (22 kW) | 20 HP (15 kW) | 30 HP (22 kW) |
| MAX Jet Power | 34 HP (25 kW) | 25.5 HP (19 kW) | 17 HP (12.5 kW) | 20.6 HP (15.1 kW) |
| Output Pressure | 50,000 psi | 50,000 psi | 50,000 psi | 60,000 psi |
| Orifice & Flow Rate ** | 0.015" / 1.09 gpm (0.41 mm / 4.13 lpm) | 0.014" / 0.84 gpm (0.36 mm / 3.18 lpm) | 0.011" / 0.52 gpm (0.28 mm / 1.97 lpm) | 0.011” / 0.6 gpm (0.28mm / 2.3 lpm) |
| Footprint LxWxH | 52.5" x 31" x 42" (1,334 mm x 787 mm x 1,067 mm) | 52.5" x 31" x 42" (1,334 mm x 787 mm x 1,067 mm) | 52.5" x 31" x 42" (1,334 mm x 787 mm x 1,067 mm) | 43" x 53" x 40" (1090 mm x 1350 mm x 1010 mm) |
Collision Sensing Terrain Follower
The Collision Sensing Terrain Follower is an essential tool for working with uneven surfaces.
Laser Feature Finder
The Laser Feature Finder allows for visual reference before introducing water and garnet.
OMAX Drill Head
Achieve reliable piercing of composites and laminates with an OMAX-Engineered pneumatic drill.
Terrain Follower
Used with the A-Jet cutting head, the Terrain Followers adjusts standoff to compensate for irregularities in the material surface.
Vacuum Assist
The OMAX Vacuum Assist is ideal for piercing brittle materials, advanced composites, challenging laminates, and more.
Bulk Abrasive Delivery System
Available in 100lbs., 600lbs., 2200 lbs. and 170 L systems, the Bulk Abrasive Deliver Systems provides continuous pressurized garnet.
Variable Speed Solid Removal System
The Variable Speed Solid Removal System allows for controlled solid evacuation to reduce downtime.
Water Level Control
OMAX Rapid Water Level Control allows for the pneumatic raising and lower of the water level to allow for cutting underwater.
Chiller System
OMAX Chiller supplies inlet water at a consistent temperature extending pump seal life for longer, sustainable production.
Laminar Filter
The Laminar Filter cleans overflow required for recycling through a closed loop system or for sanitary disposal.
Reverse Osmosis System
The Reverse Osmosis System can remove 90% of total dissolved solid in water.
Water Recycling System
The OMAX Water Recycling System captures and reuses workable overflow water.
A-Jet
With a cutting range from 0° to 60°, the A-Jet can easily cut beveled edges, angled sides, and countersinks.
